optical wavelength fiber output receiver loss conn 865 1310 1550 type mode suffix type power sensitivity budget range* type led mm l0/l1 50 /125 -16 dbm -34 dbm 18 db 3 km st 62.5/125 laser sm l2/l3 09/125 -10 dbm -34 dbm 24 db 25 km fc video audio data fmv-595 duplex v/duplex a & d two-way video with one duplex audio and one duplex data the fmv-595 is a duplex video transmission system with one duplex audio and one data port, ideal for cctv cameras and traffic surveillance. status indicators on video, sync, data, carrier detect, voltage, temperature, and optical levels are monitored via leds. system design all of our units come as an insert card version. the cards can be inserted into our 18-slot, 19?rackmountable card cage (cc-18-80w), or one of our smaller desk top card racks (dtcr series). the desk top card racks can handle one, two, four, or seven cards, allowing for greater flexibility and future expansion. they can sit on a flat surface as a larger stand-alone unit, or can be surface mounted with the flanges provided. each one of our card housings operates with an appropriate power supply. the regulated switching power supply has short circuit protection and an input operating voltage of 87- 264 v ac . features ?multimode or singlemode operation over one fiber ?8 mhz video bandwidth ?10 hz to 20 khz audio bandwidth ?true dc restoration ?flat frequency response ?complies with rs-170 and rs-170a eia video standards ?compatible with ntsc, pal and secam ?no emi or rfi and no ground loops ?stand alone or rack mount ?ideal for cctv cameras, video conferencing and its 800-867-8426 ? info@opticomm.com ? www.opticomm.com ? contact factory for higher requirement. 96 * chromatic dispersion should be taken into account.
selection guide digital broadcast am/im analog swfm analog analog-to-digital rgb video datacom rf catv appendix cctv security networking video video in/out impedance 75 ? video in/out level 1 volt peak to peak, 1.5 volts max video bandwidth 5 hz to 8 mhz @ -3db differential gain < 1.0 % typical differential phase < 1.0 typical linearity 1.1 % typical tilt 0.5 % typical compatibility ntsc, pal, secam, rs-170, rs-170a signal to noise ratio >67 db using rs-250c standards @ 1 km fm carrier frequency 70 mhz connector type bnc audio audio in/out impedance 600 ? (balanced) or 10 k ? (unbalanced) audio in/out level -6 to +6 dbm frequency response 10 hz to 20 khz signal to noise ratio > 60 db total harmonic distortion < 1.0 %, 1 khz at maximum modulation connector type hi-density 15 pin db9 (de15) data data rate dc to 300 kbps bit error rate 10 -9 data formats available async rs-232, rs-422, rc-485/2w, glenlock, manchester, 20 ma current loop, ttl, or six contact closures connector type hi-density 15 pin db9 (de15) general dimensions & weight stand alone (sa): 7.16?l x 5.21?w x .94?h 39 oz insert card (ic): 6.3?l x 0.8?w x 4.0?h 16 oz temperature operating: -40 c to +74 c; storage; -55 c to +85 c humidity 0 to 95% non-condensing operating voltage 12 v dc (200 ma) or 9-24 v ac (300ma) or 110/220 v ac vibration/shock up to 5 g's/up to 12 g's diagnostics status monitoring led indicator swfm analog sample configuration 97 opticomm reserves the right to change product specifications without notice. emissions: fcc part 15, ices-003, as/nzs, 3548, en55022 immunity: envs0204, en61000-4-2,3,4,5,6,11 safety: ul1950, can/csa 22.2, no.950-95 made in the usa
|
